Indicator-DGTPK: DIGITAL WEIGHT TRANSMITTER/INDICATOR WITH EXTENDED KEYBOARD

	DGTPK: DIGITAL WEIGHT TRANSMITTER/INDICATOR WITH EXTENDED KEYBOARD

DGTPK: weight indicator/transmitter for the industrial application

Contents

I/O SECTION

1 RS232/C or RS485 bidirectional port configurable for connection to PC or external units.
1 RS232/C bidirectional port configurable for connection to printer.
PROFIBUS serial interface (DGTPKPBV2 model).
6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
4 optoisolator photocouplers inputs: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
16-bit analogue output (DGTPKANV2 model) 4-20mA / 0-5Vdc / 0-10Vdc at choice. Maximum load applicable on the output current: 350Ohm. Minimum load applicable on the output voltage: 10kOhm.

Multifunction weight transmitter for table or panel mounting. Ideal as a microcontroller in industrial weighing and dosage systems, making an easier and safer integration of the weighing to any automation system. Fitted with 4 inputs and 6 outputs, programmable. Numerical keyboard for the quick entry of the setpoint and the tare.

MAIN FEATURES

20-key numeric/functional waterproof keyboard: quick entry of the setpoints and the tare value.
Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions.
Case for panel mounting. Front panel dimensions: 170x170mm.
Drill template: 161x162mm.
Fitted with bracket for use on table or wall mounting. A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
Calibration, Set-Up parameters, configurable from keyboard or from PC with DINITOOLS.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
Time/Date
From 12 Vdc to 24 Vdc power supply.

MAIN CERTIFICATIONS

EC Type Approval (EN45501)
OIML R76
OIML R61 – MID
OIML R51

TRANSMITTER / INDICATOR: FUNCTIONS

THROUGH KEYBOARD:

Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.

Quick entry of the setpoints and the tare values.

SELECTABLE:

High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Counting; In/Out Truck weighing; Hold e Peak.

EXTERNAL INPUT:

Simulation of key pressure; Keyboard lock.

MOSFET OUTPUT:

Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.

SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds.

DGTPKV2 and DGTPKANV2 models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.

THROUGH 16 bit ANALOGUE OUTPUT (DGTPKANV2):

Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

MASTER/REPEATER OPTION (MSTSLV code)

Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
FUNCTIONING MODES:

Multi-scale repeater (MASTER):

function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.

UNIVERSAL weight repeater:

function which allows to repeat the weight of any scales, through the configuration of the input string.

Click to learn more.

Available versions

	Code	Description
	DGTPKV2	Indicator for table/panel mounting, with 4 IN and 6 OUT. Painted steel case, 20-key keypad, LED display, and standard weighing program.
	DGTPKANV2	Indicator for table/panel mounting, 4 IN, 6 OUT, analog output. Painted steel case, 20-key keypad, LED display, and standard weighing programme.
	DGTPKPBV2-1	Indicator for table/panel mounting, 4 IN, 6 OUT, Profibus. Painted steel case, 20-key keypad, LED display, and standard weighing program.

Legal for trade approval

	Code	Description
	KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Storing the weighs (only at time of order)

	Code	Description
	SWM	WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales.

Printers/Labellers

	Code	Description
	TPRP	(S1) Thermal printer for panel mounting. Fitted with connection cable, 5V power supply (power adapter not included).
	TPRPCAL	5V power supplier for TPRP printer.
	OBTPRB	(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.

Power supply

	Code	Description
	ALSW	Built-in power supplier, with fixing bracket. 100-240 Vac 2,1 A input, 12 Vdc output.

Communication Interfaces

	Code	Description
	RSCBUSB-1	USB PC/RS232 converter cable, l=1,5m. USB/RJ11 connector.
	ALMEM	(S1) Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC or data recording on MMC/USB. Real time clock integrated for print of the date/time.
	SETHDIN-1	(S1) External RS232 / RS485 to Ethernet converter. Connectable to all Dini Argeo weight indicators via the serial port. ABS case for Omega / DIN bar

Connection cables

	Code	Description
	ETHCBRJ	(S1) Ethernet cable, l=1,5m. Made up of fairlead, for connection between indicator and PC network.

Columns, supports brackets, visors

	Code	Description
	DGTSTF	Kit for panel installation.

Options for ATEX version

	Code	Description
	DCATEXMB4	ATEX declaration of the whole for systems with KMB4 barriers. Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
	KMB4	Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.

Other options

	Code	Description
	TECSUP	Technical assistance by telephone. NET Hourly price.
	TECMAN	Printed technical manual. (Free, if downloaded from the web). € NET.
	UMAN	Printed user manual. (Free if downloaded from the web). € NET.

Golden Lotus Indicator – under weighing.lotusscale.com cert., DGTPK: DIGITAL WEIGHT TRANSMITTER/INDICATOR WITH EXTENDED KEYBOARD Weighing indicator by Diniargeo made in Italy (EU type).

DGTPK: DIGITAL WEIGHT TRANSMITTER/INDICATOR WITH EXTENDED KEYBOARD Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. DGTPK: DIGITAL WEIGHT TRANSMITTER/INDICATOR WITH EXTENDED KEYBOARD Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: hsv@hoasenvang.com.vn / or Call us: 848 3511 7799 (GMT +7).