Indicator-DGT60: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER



DGT60: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER


DGT60 indicator / repeater.



Dimensions in mm.

  • THROUGH KEYBOARD:

    Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.

  • SELECTABLE:

    High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option); Counting; In/Out Truck weighing; Hold e Peak.

  • EXTERNAL INPUT:

    Simulation of key pressure; Keyboard lock.

  • MOSFET OUTPUT:

    Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.

  • SERIAL PORTS:
    On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
    DGT60BC and DGT60AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
  • THROUGH 16 bit ANALOGUE OUTPUT (DGT60AN):

    Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for use outdoors, also in full sunlight, and where it’s necessary to view from a distance at any angle. Case completely in IP68 stainless steel. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • Functional 5-key waterproof keypad.
  • Large 6-digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
  • IP68 stainless steel case complete of wall fixing bracket.
  • Dimensions: 410 x 67 x 165 mm.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Max. 1.000.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearisation points with DINITOOLS.
  • A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec. with automatic selection.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
  • Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
  • Available as Scale or as Repeater version.
  • Fitted with an air valve for regulating the humidity and the pressure inside the indicator.

MAIN CERTIFICATIONS

  • EC Type Approval (EN45501)
  • OIML R76
  • OIML R61 – MID
  • OIML R51

I/O SECTION

  • RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
  • RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
  • PROFIBUS serial interface (DGT60PB model).
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
  • 16-bit analogue output (DGT60AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 350 Ohm; minimum applicable voltage resistance: 10 kohm.
DGT60R REPEATER FUNCTIONS
  • Version with specific program for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
  • FUNCTIONING MODES:

    Multi-scale repeater (MASTER):

    function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.

    UNIVERSAL weight repeater:

    function which allows to repeat the weight of any scales, through the configuration of the input string.

Available versions
  Code Description
DGT60BC Weight indicator with 60mm LED display. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
DGT60AN Weight indicator with 60mm LED display and analogue output. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
DGT60PB-1 Weight indicator with 60mm LED display and Profibus. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
DGT60R Weight repeater with 60 mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure, and configurable protocol.

Optional power supply cords
  Code Description
PWCORDUK Power supply cord with BS1363 plug (UK plug).
PWCORDCH Power supply cord with SEV1011 plug (CH plug).

Visor and brackets
  Code Description
STFR-1 Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.

Legal for trade approval
  Code Description
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Junction Box / Boards – Load Cell cables
  Code Description
LCCBC (S1) Cable for connection between platform and indicator, l=50cm. Female connector to be soldered.
LCCB5C (S1) LCCBC cable + 5m extension cable.
LCCB10C (S1) LCCBC cable + 10m extension cable.

Communication Interfaces
  Code Description
RSCBUSBPG (S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ11 connector. For the connection to weight indicators with IP65 and IP68 protection system.
OBRF-2 (S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRFUSB-3 (S1) External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRF232-2 (S1) External 868 MHz radio module with ABS box and cable l=3m. Fitted with DB9 connector and external power adapter. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRF232 must be combined with another radio module).
ALMEM (S1) Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC or data recording on MMC/USB. Real time clock integrated for print of the date/time.
ETHD (S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
WIFITD (S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.

Date&Time option
  Code Description
DFCLK (S1) Real time clock for printing/displaying of the date and time.

Connection cables
  Code Description
RSCBPC RS232/C cable l=1,5m with PG9 and wires for terminal board.
RSCB5 RS232 cable l=5m. For the connection of the weight indicator to a weight repeater, without connectors.
RSCB10 RS232/C cable l=10m. For the connection of the weight indicator to a weight repeater, without connectors.
ETHCBRJ (S1) Ethernet cable, l=1,5m. Made up of fairlead, for connection between indicator and PC network.

Options for ATEX version
  Code Description
DCATEXMB4 ATEX declaration of the whole for systems with KMB4 barriers. Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
KMB4 Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.

Remote control
  Code Description
TLR-1 (S1) Radio frequency remote control and receiver. 433MHz, with 6 key, for use up to 50 m of distance, in appropriate environmental conditions.

PG cable glands
  Code Description
PG9M 10 PG9 metallic cable gland set for weight indicators.

Other options
  Code Description
TECSUP Technical assistance by telephone. NET Hourly price.
TECMAN Printed technical manual. (Free, if downloaded from the web). € NET.
UMAN Printed user manual. (Free if downloaded from the web). € NET.

Golden Lotus Indicator – under weighing.lotusscale.com cert., DGT60: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER Weighing indicator by Diniargeo made in Italy (EU type).

DGT60: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. DGT60: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: [email protected] / or Call us: 848 3511 7799 (GMT +7).

CAS-NZ-CL5000J-Retail-Scale

Yêu cầu
báo giá