Indicator-3590EGT 3GD "TOUCH" : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22 ZONES

	3590EGT 3GD “TOUCH” : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22 ZONES

3590EGTC3GD: Stainless steel weight indicator with colour touch screen display.

QWERTY keyboard integrated into the Touch Screen display.

Contents

I/O SECTION

Two RS232 serial ports, for connection to printer, radio module, PC or PLC, badge reader or remote scale.
One RS485/RS232 serial port, for connection to printer, PC, PLC, or digital load cells.
4 optoisolated outputs, up to 16 with optional board.
2 optoisolated inputs, up to 8 with optional board.
Profibus interface to install in safety zone.
Analog output DAC16O needs the expansion board IOEXPB and it’s only compatible to a bench mounting.

Weight indicator with a big touch screen display, for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to

ATEX II 3G Ex nR IIB T6 Gc X for gases

ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, it’s fitted with 3 serial ports, configurable printouts and integrated alibi memory. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

5,7′ colour touch screen display
Multilanguage software
15-key alphanumerical waterproof keyboard
3-way control light
Selectable QWERTY, AZERTY o QWERTZ keyboard integrated in the touch screen
Stainless steel waterproof enclosure, with new IP68 protection system
Dimensions: 280x143x185mm
Suitable for use on the table, column or wall
Real time clock and permanent data storage
Fitted alibi memory, integrated on the motherboard
Slot for built-in micro SD for recording the configuration, logos, and customized screens (upon request)
Functions available with DINITOOLS utility

– Configuration, data entry and print formatting

– Recording and filing of all the information on PC

– Complete retrieval of the configuration

– Instrument calibration with numeric values

– Customization of the screens

24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points
4 independent analogue channels for reading of the weight
Connection with up to 16 analogue load cells of 350 Ohm (45 load cells of 1000 Ohm)
Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/d CE-M legal for trade
Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points
Connectable to printers and labellers with free programmation of the printout formats
Power supply from 110-240Vac line or external rechargeable battery (recharge in safety zone).

MAIN CERTIFICATIONS

EC Type Approval (EN45501)
OIML R76
OIML R51 – MID
OIML R134 (AF09)

Available versions

	Code	Description
	3590EGTC3GD	Colour Touch Screen indicator, ATEX 3GD, with AF01 software. Stainless steel waterproof IP68 case. Protection degree: ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).

Available firmwares

	Code	Description
	AF01	Software for totalization and formula weighing.
	AF02	Software for pieces/quantity counting.
	AF03	Software for weighbridges, input/output vehicle.
	AF04	Software for statistical checking of prepackaged goods.
	AF05	Software for price compunting and industrial labelling.
	AF08	Software for static wheel and axle weighing with 2 or various platforms.
	AF09	Software for dynamic and static axle weighing with 2 platforms.
	BATCH1	Software for single product dosage systems in loading and unloading.
	BATCH	Software for multicomponent dosage systems in loading and unloading. TAKE NOTE: For 3590, only with IOEXPB optional board.

Software for compiling the databases

	Code	Description
	DBM	PC software for the quick compiling of the databases. For 3590Exx and CPWExx instruments.

Junction Box / Boards – Load Cell cables

	Code	Description
	3590E4CH	(S1) Built-in board for multiple quick scale connection.
	JB4QA	ABS IP67, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
	JB4QAI	Stainless steel IP66, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
	LCCB	Shielded 6×0,25 mm² cable (suitable for Ex zones). €/m

TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

Approval

	Code	Description
	KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Optional power supply cords

	Code	Description
	EXACB3	(S6) Armoured 3×0,5mm² cable, for ATEX zones. €/m

TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

ATEX battery and battery charger

	Code	Description
	BP6ESTATEX3GD	IP65 stainless steel, external ATEX battery pack, for 2 and 22 zones. For Dini Argeo ATEX 3GD instruments. ATTENTION: rechargeable in safe zone only, connectable and disconnectable from the weighing system also in hazardous area.
	BTCB3GD	Cable for BP6ESTATEX3GD battery connection.
	BP6CB	Battery charger for safe area, for BP6ESTATEX3GD ATEX battery.

Declaration of ATEX conformity

	Code	Description
	DCATEX3590E3GD	Declaration of ATEX conformity of whole. Ex II 3GD IIC T6 T135°C X system, with relative label of whole system, for Dini Argeo 3590E3GD ATEX weight indicator connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.

Storing the weighs (only at time of order)

	Code	Description
	SWM	WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales.

Communication interfaces (only at time of order)

	Code	Description
	OBRF3GD-2	(S6) 868 MHz radio frequency module for ATEX 2 & 22 zones. ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
	ETHD	(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
	RS485C	(S1) Built-in RS485 interface (mounting and cable gland excluded).
	RS485OPTO	(S1) Built-in optoisolated RS485 interface (mounting, cable gland excluded).
	OBWIFI3GD-2	WIFI module for ATEX zones, with ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 30m indoors, 70m outdoors.

Digital Input/Output

	Code	Description
	For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.’ target=’_blank’>DAC16O	(S1) Built-in analog output, 0-4/20 mA, 0-10VdC (cable gland excluded). For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.
	IOEXPB	(S1) Built-in board with 12 OUT and 6 IN (mounting and cable gland excluded). It includes expansion circuit of the power supply range of the indicator (8-40Vdc). NOT COMPATIBLE WITH 3590E4CH

Printers/Labellers for safe zones

	Code	Description
	OBTPRB	(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.
	LP542S	(S1) Direct termal labeller.
	LP542TT	(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
	SMTPLUSPRO	(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
	PRNSERV	Custom-made ticket (up to 4 layouts). NET price.
	APRNSERV	Custom-made label (up to 4 layouts). NET price.

Connection cables

	Code	Description
	RSCBTW	Cable of 2 twisted pairs (€/metre). Double screening for RS422–RS485 connections. 10m minimum length

TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

Columns and supports

	Code	Description
	STFI-1	Stainless steel fixing bracket. For mounting the weight indicator on wall.
	STFR-1	Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
	CSP38I-1	Stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
	STFA12	Stainless steel bracket for mounting the ATEX battery on column. Compatible with “DFWBP76ATEX..” and “BP6ESTATEX3GD..”.

PG cable glands

	Code	Description
	PG7EX	10 PG7 metallic cable gland set for ATEX indicators.
	PG9EX	10 PG9 metallic cable gland set for ATEX indicators.

Other options

	Code	Description
	TECSUP	Technical assistance by telephone. NET Hourly price.

Golden Lotus Indicator – under weighing.lotusscale.com cert., 3590EGT 3GD “TOUCH” : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22 ZONES Weighing indicator by Diniargeo made in Italy (EU type).
Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. 3590EGT 3GD “TOUCH” : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22 ZONES Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: hsv@hoasenvang.com.vn / or Call 848 3511 7799 (GMT +7)