Indicator-DGT603GD: MAXI "GOLIAH" WEIGHT INDICATOR-REPEATER FOR HAZARDOUS AREAS

	DGT603GD: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER FOR HAZARDOUS AREAS

DGT603GD: weight indicator / repeater for ATEX zones

Dimensions in mm.

Contents

FUNCTIONS

THROUGH KEYBOARD:

Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
SELECTABLE:

High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with Alibi memory ALMEM option); Counting; In/Out Truck weighing; Hold e Peak.
EXTERNAL INPUT:

Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT:

Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
DGT60BC3GD and DGT60AN3GD models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGT60AN3GD):

Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

Weight indicator/ repeater particularly suitable for use in hazardous environments, where it’s necessary to view the weight from a distance at any angle. Usable in areas:

ATEX II 3G Ex nR IIC T6 Gc X for gases

ATEX II 3D Ex tc IIIC T130°C Dc IP68 X for dust.

Fitted with a very bright 60mm LED matrix display and IP68 stainless steel case. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

Functional 5-key waterproof keypad.
Large 6-digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
IP68 stainless steel case complete of wall fixing bracket.
Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
Max. 1.000.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
Up to 8 signal linearisation points with DINITOOLS.
A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec. with automatic selection.
Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
Power supply from 110-240 Vac.
Available as Scale or as Repeater version.

MAIN CERTIFICATIONS

EC Type Approval (EN45501)
OIML R76
OIML R61 – MID
OIML R51

I/O SECTION

RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
PROFIBUS bidirectional port (DGT60PB3GD model).
2 MOSFET 150 mA 48 Vac / 150 mA 60 Vdc (NO) outputs, with configurable functions.
2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
16-bit analogue output (DGT60AN3GD model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 350 Ohm; minimum applicable voltage resistance: 10 kohm.
TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

DGT60R REPEATER FUNCTIONS

Version with specific program for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
FUNCTIONING MODES:

– Multi-scale repeater (MASTER):

function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.

– UNIVERSAL weight repeater:

function which allows to repeat the weight of any scales, through the configuration of the input string.

Available versions

	Code	Description
	DGT60BC3GD	ATEX 3GD weight indicator with 60mm LED display. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T130°C Dc IP68 X for dust. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR, IT).
	DGT60AN3GD	ATEX 3GD weight indicator with 60mm LED display and analogue output. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T130°C Dc IP68 X for dust. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR, IT).
	DGT60PB3GD-1	ATEX 3GD weight indicator with 60mm LED display and Profibus. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T130°C Dc IP68 X for dust. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR, IT).
	DGT60R3GD	ATEX 3GD weight repeater with 60mm LED display. IP68 stainless steel case and 5-key keypad. Protection mode: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T130°C Dc IP68 X for dust. Complete with manual and ATEX CE conformity declaration (available in EN, DE, FR, IT).

Legal for trade approval

	Code	Description
	KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Options for ATEX version

	Code	Description
	DCATEX3GD	Declaration of ATEX conformity of whole. Ex II 3GD IIC T6 T130°C X system, with relative label of whole system, for Dini Argeo ATEX weight indicator connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.

Communication Interfaces

	Code	Description
	OBRF3GD-2	(S6) 868 MHz radio frequency module for ATEX 2 & 22 zones. ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
	ALMEM	(S1) Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC or data recording on MMC/USB. Real time clock integrated for print of the date/time.
	ETHD	(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.

Date&Time option

	Code	Description
	DFCLK	(S1) Real time clock for printing/displaying of the date and time.

Columns, supports brackets, visors

	Code	Description
	STFR-1	Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.

PG cable glands

	Code	Description
	PG9EX	10 PG9 metallic cable gland set for ATEX indicators.

Other options

	Code	Description
	TECSUP	Technical assistance by telephone. NET Hourly price.

Golden Lotus Indicator – under weighing.lotusscale.com cert., DGT603GD: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER FOR HAZARDOUS AREAS Weighing indicator by Diniargeo made in Italy (EU type).

DGT603GD: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER FOR HAZARDOUS AREAS Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. DGT603GD: MAXI “GOLIAH” WEIGHT INDICATOR-REPEATER FOR HAZARDOUS AREAS Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: hsv@hoasenvang.com.vn / or Call us: 848 3511 7799 (GMT +7).