Indicator-3590E "ENTERPRISE" 3GD series: WEIGHT INDICATOR FOR ADVANCED APPLICATIONS IN ATEX 2 & 22 ZONES

	3590E “ENTERPRISE” 3GD series: WEIGHT INDICATOR FOR ADVANCED APPLICATIONS IN ATEX 2 & 22 ZONES

3590E3GD: weight indicator for advanced applications in ATEX zones

Contents

I/O SECTION

Two RS232 serial ports, for connection to printer (in safety zone), PC or PLC.
One RS232/RS485 serial port, for connection to printer (in safety zone), PC or PLC.
4 optoisolated outputs (16 in the IO versions).
2 optoisolated inputs (8 in the IO versions).
Profibus interface to install in safety zone (available upon request for E-AF01 and E-BATCH1 versions).
Analogue output with D/A converter at 16 bit, 0-10Vdc, 0-20mA, 4-20mA (available upon request for the IO versions).

Weight indicator for ATEX areas classified at risk of explosion with protection methods according to

ATEX II 3G Ex nR IIC T6 Gc X for gases

ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust.

The wide range of available software program guarantees the maximum versatility. Completely programmable printouts and fitted with alibi memory. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

25-key alphanumerical waterproof keyboard.
Highly efficient red LED display with 6 digits 15mm high.
Backlit LCD graphic 25x100mm display.
Synoptic bar graph with 16 bright LEDs showing the active functions.
Easy to clean STAINLESS STEEL waterproof IP68 enclosure; resistant to harsh and corrosive environments.
Dimensions: 264x115x174 mm.
Suitable for use on the table, column, or wall.
Real time clock and permanent data storage.
Fitted with alibi memory, integrated on the motherboard.
Functions available with DINITOOLS utility

– Configuration, calibration, data entry and print formatting.

– Recording and filing of all the information on PC.

– Complete retrieval of the saved data for quick replacement.

– Instrument calibration with numeric values.

Selection of the programme language directly in the set-up.
24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points.
Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/d CE-M legal for trade.
Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points.
110-240 Vac power supply.
Management of up to 4 independent scales (up to 2 for the AF03 version).
Connectable with up to 16 analogue 350-Ohm (or 45 1000-Ohm) load cells.
Connectable to printers and labellers with the command drivers.

MAIN CERTIFICATIONS

EC Type Approval (EN45501)
OIML R76
OIML R51 – MID
OIML R134 (AF09)

Available versions

	Code	Description
	3590EXT01BC3GD	ATEX 3GD indicator with AF01 software. Stainless steel IP68 case, 25-key keypad, LED display and graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
	3590EXT01BCIO3GD	ATEX 3GD indicator with AF01 software, 16 outputs and 8 inputs. Stainless steel IP68 case, 25-key keypad, LED display and backlit graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
	3590EXT03BC3GD	ATEX 3GD indicator with AF03 software. Stainless steel IP68 case, 25-key keypad, LED display and LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
	3590EXTBATCH1BC3GD	ATEX 3GD indicator with BATCH1 software. Stainless steel IP68 case, 25-key keypad, LED display and graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).
	3590EXTBATCHBCIO3GD	ATEX 3GD indicator with BATCH software, 16 outputs and 8 inputs. Stainless steel IP68 case, 25-key keypad, LED display and graphic LCD display. Protection degree: ATEX II 3G Ex nR IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Fitted with manuals and conformity declaration (available in IT, EN, FR).

Software for compiling the databases

	Code	Description
	DBM	PC software for the quick compiling of the databases. For 3590Exx and CPWExx instruments.

Junction Box / Boards – Load Cell cables

	Code	Description
	JB4QA	ABS IP67, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
	JB4QAI	Stainless steel IP66, ATEX, equalisation box for up to 4 cells. 4 + 1 fairleads. Protection modes: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115°C Db IP65 for dusts. Complete with manual and ATEX CE CONFORMITY DECLARATIONS (available in EN, DE, FR and IT).
	LCCB	Shielded 6×0,25 mm² cable (suitable for Ex zones). €/m

TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

Legal for trade approval

	Code	Description
	KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Optional power supply cords

	Code	Description
	EXACB3	(S6) Armoured 3×0,5mm² cable, for ATEX zones. €/m

TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

ATEX battery and battery charger

	Code	Description
	BP6ESTATEX3GD	IP65 stainless steel, external ATEX battery pack, for 2 and 22 zones. For Dini Argeo ATEX 3GD instruments. ATTENTION: rechargeable in safe zone only, connectable and disconnectable from the weighing system also in hazardous area.
	BP6CB	Battery charger for safe area, for BP6ESTATEX3GD ATEX battery.
	BTCB3GD	Cable for BP6ESTATEX3GD battery connection.

Declaration of ATEX conformity

	Code	Description
	DCATEX3590E3GD	Declaration of ATEX conformity of whole. Ex II 3GD IIC T6 T135°C X system, with relative label of whole system, for Dini Argeo 3590E3GD ATEX weight indicator connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.

Storing the weighs (only at time of order)

	Code	Description
	SWM	WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales.

Communication Interfaces

	Code	Description
	OBRF3GD-2	(S6) 868 MHz radio frequency module for ATEX 2 & 22 zones. ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIC T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
	ETHD	(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
	OBWIFI3GD-2	WIFI module for ATEX zones, with ABS IP66 case, 3 m shielded cable, and power supply from indicator. Protection: ATEX II 3G Ex nA IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T125°C Dc IP66 X for dust. Max. functioning distance, in appropriate environmental and installation conditions: 30m indoors, 70m outdoors.

Connection cables

	Code	Description
	RSCBTW	Cable of 2 twisted pairs (€/metre). Double screening for RS422–RS485 connections. 10m minimum length

TAKE NOTE:

All the cables must be installed and protected according to the standards for electrical equipment.

Digital Input/Output

	Code	Description
	For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.’ target=’_blank’>DAC16O	(S1) Built-in analog output, 0-4/20 mA, 0-10VdC (cable gland excluded). For DFW, 3590 and CPW indicators. NOTE: For 3590, only with IOEXPB optional board.

Printers/Labellers for safe zones

	Code	Description
	OBTPRB	(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.
	LP542S	(S1) Direct termal labeller.
	LP542TT	(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
	SMTPLUSPRO	(S1) Thermal transfer or direct termal labeller. Peel-off kit in option.
	PRNSERV	Custom-made ticket (up to 4 layouts). NET price.
	APRNSERV	Custom-made label (up to 4 layouts). NET price.

Columns, supports brackets, visors

	Code	Description
	STFI-1	Stainless steel fixing bracket. For mounting the weight indicator on wall.
	STFR-1	Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
	STFA12	Stainless steel bracket for mounting the ATEX battery on column. Compatible with “DFWBP76ATEX..” and “BP6ESTATEX3GD..”.
	CSP38I-1	Stainless steel column 450x450mm, h=917mm, Ø 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.

PG cable glands

	Code	Description
	PG7EX	10 PG7 metallic cable gland set for ATEX indicators.
	PG9EX	10 PG9 metallic cable gland set for ATEX indicators.

Other options

	Code	Description
	TECSUP	Technical assistance by telephone. NET Hourly price.

Golden Lotus Indicator – under weighing.lotusscale.com cert., 3590E “ENTERPRISE” 3GD series: WEIGHT INDICATOR FOR ADVANCED APPLICATIONS IN ATEX 2 & 22 ZONES Weighing indicator by Diniargeo made in Italy (EU type).
Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. 3590E “ENTERPRISE” 3GD series: WEIGHT INDICATOR FOR ADVANCED APPLICATIONS IN ATEX 2 & 22 ZONES Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: hsv@hoasenvang.com.vn / or Call 848 3511 7799 (GMT +7)