Indicator-PROFIBUS interface for single weighing scale or scales network



PROFIBUS interface for single weighing scale or scales network



The PROFIBUS interface allows a simultaneous communication between 16 digital weighing scales, simplifying the weighing system.

  • This PROFIBUS converter, connected to an individual digital scale or to a selected one from a scales network, transmit the following controls and data by PROFIBUS protocol:

    – NET ,GROSS and TARE weight

    – Weight status (for example; positive, negative, stable, unstable)

    – Error conditions (es. overload, underload)

    – Aliby Memory

    – Calibration

    – Configuration SETUP)

    – DIGITAL INPUT status

    – RELAY OUTPUT status
    – SETPOINT output writings

HUB PROFIBUS FUNCTION, UP TO 16 WEIGHING SCALES

  • This set up permits the simultaneous check of all the weighing scales network data by PROFIBUS protocol.

    In detail:

    – NET weight and GROSS weight of the scales

    – Weight status (for example, positive, negative, stable, unstable)

    – Error condition (es. overload, underload)

    – DIGITAL INPUT status

    – RELAY OUTPUT status

TECHNICAL FEATURES OF PROFIBUS CONVERTER

  • PROFIBUS-DP slave (IEC 61158).
  • ABS case for panel mounting on DIN bar.
  • Suitable to function with DGT1S weight transmitter. Quick configuration from the transmitter programming menu.
  • RS485 interface on RJ45 connector for quick connection to DGT1S.
  • Profibus port on 9 Pin connector.
  • Board optoisolation against electric or electrostatic discharges.
  • Indexing from 0 to 98.
  • Automatic Baud Rate selection from 9600 bit/s to 12Mbit/s.
  • Power source: from 12 to 24Vdc.

Available versions
  Code Description
PROFIBUS1S RS485 / Profibus compact converter, for DIN bar.

Power supplier for DIN bar
  Code Description
DR1512 12Vdc power supplier for DIN bar. 110/240Vac input.

Golden Lotus Indicator – under weighing.lotusscale.com cert., PROFIBUS interface for single weighing scale or scales network Weighing indicator by Diniargeo made in Italy (EU type).

PROFIBUS interface for single weighing scale or scales network Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. PROFIBUS interface for single weighing scale or scales network Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: [email protected] / or Call us: 848 3511 7799 (GMT +7).

CAS-NZ-CL5000J-Retail-Scale

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.