Indicator-“DGTQF”: MICROCONTROLLER FOR INDUSTRIAL DOSAGE SYSTEMS



“DGTQF”: MICROCONTROLLER FOR INDUSTRIAL DOSAGE SYSTEMS


DGTQF: microcontroller for industrial dosage systems

  • Available dosage functions:

    Single product dosage in loading functioning

    Single product dosage in unloading functioning

    Multi-product dosage functioning

High performing microcontroller which, through the simple programming of the parameters, offers the possibility to manage single product dosage systems in loading or in unloading, or multiproduct dosages and mixtures. CE-M approvable (OIML R-76 / EN 45501).

MAIN FEATURES

  • Easy to use 5-key waterproof keyboard.
  • Highly efficient red LED display with 6 13-mm digits and 6 LEDs for showing active functions.
  • Case for panel mounting in Abs according to DIN standard, 96x96x80mm (lxhxp). Perforation 90×88 mm (lxh) for panel mounting.
  • A/D 24-bit sigma-delta conversion with 4 channels, up to 200 conv./sec. autoselect.
  • Management of a weighing system from 1 to 4 channels (cells) with digital equalization.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Calibration, Set-Up parameters, configurable from keyboard or PC with Dinitools.
  • Up to 8 signal linearization points with DINITOOLS (3 from keypad).
  • Time Date.
  • Memory back-up for recording dosage data in case it’s accidentally turned off.
  • Printing the dosage and consumption data.
  • From 12 Vdc to 24 Vdc power supply.

MAIN CERTIFICATIONS

  • EC Type Approval (EN45501)
  • OIML R76
  • OIML R61 – MID
  • OIML R51

I/O SECTION

  • RS232/C bidirectional port configurable for connection with external units.
  • RS485 bidirectional port configurable for network connection.
  • Six 150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs configurables according to the selected dosage function.
  • 2 configurable optoisolator photocoupler inputs: 12÷24 Vdc, 5 mA min – 20 mA max for START/STOP dosage.
  • Analogue 16 bit output (only for DGTQFAN model), configurable as 4-20mA, 0-5Vdc or 0-10Vdc. Maximum load applicable on the output current: 350Ohm. Minimum load applicable on the output voltage: 10kOhm.

Available versions
  Code Description
DGTQF Microcontroller for dosage, with 2 IN and 6 OUT. 5-key keypad and LED display.
DGTQFAN Microcontroller for dosage, with 2 IN, 6 OUT, analogue output. 5-key keypad and LED display.

Legal for trade approval
  Code Description
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Printers/Labellers
  Code Description
TPRP (S1) Thermal printer for panel mounting. Fitted with connection cable, 5V power supply (power adapter not included).
TPRPCAL 5V power supplier for TPRP printer.

Communication Interfaces
  Code Description
SETHDIN-1 (S1) External RS232 / RS485 to Ethernet converter. Connectable to all Dini Argeo weight indicators via the serial port. ABS case for Omega / DIN bar

Connection cables
  Code Description
ETHCBRJ (S1) Ethernet cable, l=1,5m. Made up of fairlead, for connection between indicator and PC network.

Power supply
  Code Description
ALSW Built-in power supplier, with fixing bracket. 100-240 Vac 2,1 A input, 12 Vdc output.

Options for ATEX version
  Code Description
DCATEXMB4 ATEX declaration of the whole for systems with KMB4 barriers. Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
KMB4 Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.

Other options
  Code Description
TECSUP Technical assistance by telephone. NET Hourly price.
TECMAN Printed technical manual. (Free, if downloaded from the web). € NET.
UMAN Printed user manual. (Free if downloaded from the web). € NET.

Golden Lotus Indicator – under weighing.lotusscale.com cert., “DGTQF”: MICROCONTROLLER FOR INDUSTRIAL DOSAGE SYSTEMS Weighing indicator by Diniargeo made in Italy (EU type).

“DGTQF”: MICROCONTROLLER FOR INDUSTRIAL DOSAGE SYSTEMS Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. “DGTQF”: MICROCONTROLLER FOR INDUSTRIAL DOSAGE SYSTEMS Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: [email protected] / or Call us: 848 3511 7799 (GMT +7).

CAS-NZ-CL5000J-Retail-Scale

Leave a Reply

Your email address will not be published.

Time limit is exhausted. Please reload CAPTCHA.

Yêu cầu
báo giá