Indicator-DGT100: MAXI WEIGHT INDICATOR-REPEATER

	DGT100: MAXI WEIGHT INDICATOR-REPEATER

DGT100 indicator / repeater

equipped with optional protection visor

Dimensions in mm

PRESENTATION

Contents

DGT100BC / DGT100AN / DGT100PB FUNCTIONS

THROUGH KEYBOARD:

Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
SELECTABLE:

High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option); Counting; In/Out Truck weighing; Hold e Peak.
EXTERNAL INPUT:

Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT:

Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
SERIAL PORTS:
On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
DGT100BC and DGT100AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGT100AN):

Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

DGT100R REPEATER FUNCTIONS

Version with specific program for using the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
FUNCTIONING MODES:

– Multi-scale repeater (MASTER):

function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.

– UNIVERSAL weight repeater:

function which allows to repeat the weight of any scales, through the configuration of the input string.

Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for outdoor uses, it is clearly visible even in full sunlight and where it’s necessary to view from a distance at any angle. Case completely in IP68 stainless steel. CE-M approved (OIML R-76 / EN 45501). MID approved (OIML R-61).

MAIN FEATURES

Functional 5-key waterproof keypad.
Large 6-digit display, 100 mm high, with very efficient SMD LEDs, complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
Software adjustment of the brightness intensity by keyboard.
AISI 304 stainless steel case with IP68 protection complete of wall fixing bracket.
Fitted with an anti condensation air valve for regulating the humidity and the pressure inside the indicator.
Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
Max. 1.000.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
Up to 8 signal linearisation points with DINITOOLS.
A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec. with automatic selection.
Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
Available as Scale or as Repeater version.

MAIN CERTIFICATIONS

EC Type Approval (EN45501)
OIML R76
OIML R61 – MID
OIML R51

I/O SECTION

RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
PROFIBUS serial interface (DGT100PB model).
2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
16-bit analogue output (DGT100AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 350 Ohm; minimum applicable voltage resistance: 10 kohm.

Available versions

	Code	Description
	DGT100BC	Weight indicator with 100mm LED display. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
	DGT100AN	Weight indicator with 100mm LED display and analogue output. IP68 stainless steel case, 5-key keypad, and air valve for humidity and pressure regulation.
	DGT100PB	Weight indicator with 100mm LED display and Profibus. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
	DGT100R	Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure.

Optional power supply cords

	Code	Description
	PWCORDUK	Power supply cord with BS1363 plug (UK plug).
	PWCORDCH	Power supply cord with SEV1011 plug (CH plug).

Columns, supports brackets, visors

	Code	Description
	DGT100S	2 stainless steel brackets for fixing on the ceiling or table.
	DGT100V	Attached stainless steel visor. It protects from sun and rain and improves the indicator visibility.
	STFR-1	Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.

Legal for trade approval

	Code	Description
	KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Junction Box / Boards – Load Cell cables

	Code	Description
	LCCBC	(S1) Cable for connection between platform and indicator, l=50cm. Female connector to be soldered.
	LCCB5C	(S1) LCCBC cable + 5m extension cable.
	LCCB10C	(S1) LCCBC cable + 10m extension cable.

Communication Interfaces

	Code	Description
	RSCBUSB-1	USB PC/RS232 converter cable, l=1,5m. USB/RJ11 connector.
	OBRF-2	(S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
	OBRF232-2	(S1) External 868 MHz radio module with ABS box and cable l=3m. Fitted with DB9 connector and external power adapter. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRF232 must be combined with another radio module).
	ALMEM	(S1) Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC or data recording on MMC/USB. Real time clock integrated for print of the date/time.
	ETHD	(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
	WIFITD	(S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.

Date&Time option

	Code	Description
	DFCLK	(S1) Real time clock for printing/displaying of the date and time.

Connection cables

	Code	Description
	RSCBPC	RS232/C cable l=1,5m with PG9 and wires for terminal board.
	RSCB5	RS232 cable l=5m. For the connection of the weight indicator to a weight repeater, without connectors.
	RSCB10	RS232/C cable l=10m. For the connection of the weight indicator to a weight repeater, without connectors.
	RSCBTW	Cable of 2 twisted pairs (€/metre). Double screening for RS422–RS485 connections. 10m minimum length
	ETHCBRJ	(S1) Ethernet cable, l=1,5m. Made up of fairlead, for connection between indicator and PC network.

Options for ATEX version (only at time of order)

	Code	Description
	KMB4	Kit of 3 ATEX zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20°C ≤ Ta ≤ +40°C) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130°C Dc IP65 (-20°C ≤ Ta ≤ +40°C) for dusts.
	DCATEXMB4	ATEX declaration of the whole for systems with KMB4 barriers. Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.

Remote control

	Code	Description
	TLR-1	(S1) Radio frequency remote control and receiver. 433MHz, with 6 key, for use up to 50 m of distance, in appropriate environmental conditions.

PG cable glands

	Code	Description
	PG9M	10 PG9 metallic cable gland set for weight indicators.

Other options

	Code	Description
	TECSUP	Technical assistance by telephone. NET Hourly price.
	TECMAN	Printed technical manual. (Free, if downloaded from the web). € NET.
	UMAN	Printed user manual. (Free if downloaded from the web). € NET.

Golden Lotus Indicator – under weighing.lotusscale.com cert., DGT100: MAXI WEIGHT INDICATOR-REPEATER Weighing indicator by Diniargeo made in Italy (EU type).

DGT100: MAXI WEIGHT INDICATOR-REPEATER Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. DGT100: MAXI WEIGHT INDICATOR-REPEATER Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: hsv@hoasenvang.com.vn / or Call us: 848 3511 7799 (GMT +7).