Indicator-“DAC16O”: 16bit ANALOGUE PROGRAMMABLE OUTPUT



“DAC16O”: 16bit ANALOGUE PROGRAMMABLE OUTPUT
Optoisolated 16 bit analogue output, in voltage or in current. Programmable as 0…5/0…10Vdc, 0…20/4…20mA through the indicator or through the PC with Dinitools. Particularly suitable for use with PLC’s and in industrial environments.

TECHNICAL FEATURES:

  • Output values programmable through the indicator or through the PC Dinitools: 0…5/0…10Vdc or 0…20/4…20mA.
  • 16 bit resolution (65536 divisions).
  • Update frequency: from 30 to 50Hz (depending on the weight indicator).
  • Precision: minimum 0,15%, typical 0,08% in relation to the F.S.O. of the analogue output.
  • Maximum applicable resistance on the output in current: 350 ohm.
  • Minimum applicable resistance on the output in voltage: 10 Kohm.
  • Easily configurable through the indicator or through the PC using Dinitools.
  • NOTE: this board is an option available only when ordering the weight indicator.

Available Versions
  Code Description
For DFW, 3590 and CPW indicators.

NOTE: For 3590, only with IOEXPB optional board.’ target=’_blank’>DAC16O
(S1) Built-in analog output, 0-4/20 mA, 0-10VdC (cable gland excluded). For DFW, 3590 and CPW indicators.

NOTE: For 3590, only with IOEXPB optional board.


FEATURES OF THE CONNECTABLE CABLE OF THE ADC16I AND DAC16O:

Shielded 2 x 0,25 mm² cable:

Maximum length for analogue output in current – 100m. Maximum length for analogue output in voltage – 50m.

Shielded 2 x 0,5 mm² cable:

Maximum length for analogue output in current – 150m. Maximum length for analogue output in voltage – 75m.

Shielded 2 x 1 mm² cable:

Maximum length for analogue output in current – 300m. Maximum length for analogue output in voltage – 150m.

Golden Lotus Indicator – under weighing.lotusscale.com cert., “DAC16O”: 16bit ANALOGUE PROGRAMMABLE OUTPUT Weighing indicator by Diniargeo made in Italy (EU type).

“DAC16O”: 16bit ANALOGUE PROGRAMMABLE OUTPUT Digital weight indicator with a big display, suitable for advanced industrial applications. It allows the visualization of all the weighing data and the customization of the screens, simplifying the user operations. Fitted with 3 serial ports, transmission protocols for data communication, completely configurable printouts, integrated alibi memory, and port for connection to barcode/badge reader. “DAC16O”: 16bit ANALOGUE PROGRAMMABLE OUTPUT Diniargeo Weight indicator for ATEX 2 & 22 areas classified at risk of explosion. Protection methods according to ATEX II 3G Ex nR IIB T6 Gc X for gases and ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust. Suitable for advanced industrial applications, under CE-M approvable (OIML R-76 / EN 45501).

* Golden Lotus Indicator products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Indicators in Asia, southern Vietnam and can advise product solutions, products and services. Feel free to contact us: [email protected] / or Call us: 848 3511 7799 (GMT +7).

CAS-NZ-CL5000J-Retail-Scale

Leave a Reply

Your email address will not be published.

Time limit is exhausted. Please reload CAPTCHA.

Yêu cầu
báo giá