"WKPT" ELECTRONICS AND ANALOGUE LOAD CELLS KIT FOR WEIGHBRIDGES

	“WKPT” ELECTRONICS AND ANALOGUE LOAD CELLS KIT FOR WEIGHBRIDGES

Contents

"3590ET" INDICATOR

Touch screen, graphic, color display.
ABS waterproof IP65 case.
Integrated alibi memory for CE-M approved communication with printer and PC.
3 serial ports, 2 RS232 and 1 RS485 for connection to printer, repeater and PC.
2 inputs and 4 outputs.
“AF03” application software suitable for vehicles weighing and weighbridges management, with input/output products check.

"JB10Q" JUCTION BOX

Junction box with polyester case.
IP65 protection degree or IP68 with the use of GELBOX anti condensation gel (optional, you need 600ml of gel).
Surge Arresters against electric discharges and disturbances.

Analogue weighbridges kit made up of 3590ET touch screen weight indicator with AF03 software for weighbridges, 8 stainless steel IP68 “RCPT” analogue load cells, complete with galvanized steel oscillating resting joints and junction box with surge arresters.

“RCPT” ANALOGUE LOAD CELLS

Minimum load cell verification interval: Vmin = EMax / 10.000
Maximum number of load cell divisions: nLC = 3000 (C3)
Sensitivity: 2mV/V +/- 0,1%
Temperature effect on full scale: 0,002% /°C
Temperature effect on zero: 0,002% /°C
Compensated Temperature Range: -10°C/+40°C
Operating Temperature Range: -30°C/+70°C
Creep error after 30 minutes: 0,02% F.S.
Excitation voltage from 5 to 15 VDC
Input Resistance: 700 ± 20 Ohm
Output Resistance: 703 ± 7 Ohm
Zero Balance: +/-1% F.S.
Insulation Resistance: 5000 MOhm
Safe Overload: 150% F.S.
Ultimate Overload: 250% F.S.
4-wire shielded cable, 14m long, 5mm diameter.

DOWNLOAD

DiniTools_4.20.00.zip	USER_MAN_ENG_AF03GT_v7_R1.pdf
E-AF03_05.01_14.07_IT_T.pdf	USER_MAN_ESP_AF03GT_v7_R1.pdf
E-AF03_05_14.09_EN_U.pdf	USER_MAN_FRA_AF03GT_v7_R1.pdf
KRCA_TECHNICAL_DRAWING.zip	USER_MAN_ITA_AF03GT_v7_R1.pdf
RCPT-RCPTD_TECHNICAL_DRAWINGS.zip	Last Firmware Revision News
USER_MAN_DEU_AF03GT_v7_R1.pdf

Available versions

	Code	Description
	WKPT830A	Kit for ANALOGUE weightbridges with 8 load cells. Composed of 3590ET indicator fitted with AF03 software, 2 inputs, 4 outputs and RS485 port, 8 RCPT30C3 analogue load cells with mounting kit, and JB10Q equalisation box with 10 inputs.

Legal for trade approval

	Code	Description
	KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.

Protection for junction box/electronic circuits

	Code	Description
	GELBOX	(S1) Anti condensation, insulating, and sealing gel. Useful for the protection of the electronic circuits of the weighing system, even in conditions of prolonged immersions in time. Pack of 300ml.

Connection cables

	Code	Description
	LCCB	Shielded 6×0,25 mm² cable (suitable for Ex zones). €/m

Communication Interfaces

	Code	Description
	OBRF-2	(S1) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
	OBRFUSB-3	External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
	WIFITD-1	(S1) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.
	ETHD	(S1) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
	RS485OPTO	(S1) Built-in optoisolated RS485 interface (mounting, cable gland excluded).

Weight repeaters

	Code	Description
	DGT100R-1	Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure.

Printers/Labellers

	Code	Description
	OBTPRB	(S1) Thermal printer in table version. For weight indicator, with ABS case, 1,5 m connection cable and internal power adapter.
	PR80	(S1) Thermal printer with print cutter.
	TM295	(S1) Dot matrix impact printer.
	LX300PRO	(S1) Dot matrix impact printer.
	PRNSERV	Custom-made ticket (up to 4 layouts). NET price.
	APRNSERV	Custom-made label (up to 4 layouts). NET price.

All the specifications and images can be subject to variations and upgrades without prior notice.

Golden Lotus Kit for assembling weighbridges loadcell – under weighing.lotusscale.com cert., “WKPT” ELECTRONICS AND ANALOGUE LOAD CELLS KIT FOR WEIGHBRIDGES Dini Argeo load cell by Diniargeo made in Italy (EU type).

“WKPT” ELECTRONICS AND ANALOGUE LOAD CELLS KIT FOR WEIGHBRIDGES Alu, stainless steel and alloy approved load cells, suitable for approved scales, or for weighing tanks and hoppers, with the aid of its accessories. Stainless steel compression load cells suitable for weighing, Digital version of compression load cells, 4000 divisions, Compression load cell for CE-M approved weighbridges, tanks, silos, etc. DiniArgeo Kit for assembling weighbridges suitable for weighing belts, hoppers, tanks and mixers with small or medium size.

* Golden Lotus Loadcell products post at Lotusscale.com is under sale right by “Golden Lotus M.E.C” we distribute DiniArgeo Scales and DiniArgeo Loadcells in Asia, Southern Vietnam and can advise product solutions, products and services. Feel free to contact us: hsv@hoasenvang.com.vn / or Call us: 8428 3511 7799 (GMT +7).